skill saw guide

To use your sawguide just measure your material to be cut and make your pencil mark as usual.

Lay your sawguide on the "keeper side" (vs. the cut off side) of your pencil line on the material to be cut with the single thickness long edge of the sawguide right on the pencil line.

Carefully clamp each end of the sawguide to your work with spring clamps positioning them at a 45 degree angle to the sawguide (make sure that you're still right on the line when your done).

Now, set your saw to the appropriate depth and run it down the guide as you did before with the saw foot against the guide ripper, and PRESTO!, you have a straight as an arrow, dead-on accurate cut you can be proud of!